Tuesday, 29 August 2017 09:02

It is tiny, but it is important

Written by 
Usually between 0.8 mm and 1 mm in diameter, the claw air admission hole is commonly located in the claw itself, either in the metal body of the claw or sometimes in the claw bowl itself. Usually between 0.8 mm and 1 mm in diameter, the claw air admission hole is commonly located in the claw itself, either in the metal body of the claw or sometimes in the claw bowl itself.

It is only a tiny part of your milking plant, and it can sometimes be very unobtrusively placed, but it is critical to the ability of your milking plant to function correctly.

Naturally this tiny part of your plant is the claw air admission hole.

Usually between 0.8 mm and 1 mm in diameter, the claw air admission hole is commonly located in the claw itself, either in the metal body of the claw or sometimes in the claw bowl itself.

In some cases the air admission hole is located in each of the liners, either in the short milk tube or near the mouthpiece of the liner.

This tiny hole has two key functions in the milking process.

Firstly, the air admission hole allows milk to move away from the claw to the milkline.

Milk, like all liquids, does not run “uphill”. To be able to move upwards in any part of its pathway to the milkline, milk will need to form “slugs” in order to defy gravity, and it needs air to form those slugs.

The air entering the claw through the air admission hole allows those slugs to form and milk can then travel to the milkline.

Hence one of the first signs of a blocked air admission hole is the claw filling with milk as a cow is being milked – because the milk is unable to get away properly.

The second key function of the air admission hole is to allow air to enter the claw at a controlled rate when vacuum is broken at the end of milking to allow cups to be removed.

Otherwise, if there is an effective seal between liners and teats, and no air can enter the claw after vacuum is broken at the end of milking, the cluster will be unable to fall away from the cow, and the only way removal can then occur is by pulling the cups off the cow.

The end result of pulling cups from the cow is to allow blasts of air into the claw as the first cup breaks vacuum away from the teat.

This causes “impacts” which are blasts of air and milk which travel into the other three quarters of the cow with a very high risk of transmitting mastitis bacteria.

Hence this tiny air admission hole plays a key role in efficient milking and effective mastitis control, so it is very important to ensure these holes are kept clean.

The signs of a blocked air admission hole are twofold as described above – the claw bowl filling with milk during milking, and the cluster failing to fall away from the cow after vacuum is broken at the end of milking.

All milkers should be trained to be on the lookout for these clues to a blocked air admission hole.

The air admission hole is commonly blocked by dirt, bits of grass or manure, and in summer it is also quite common for flies to get stuck in the hole.

Naturally these foreign bodies are to some extent assisted to block the hole by the air movement into the hole and hence it is not uncommon to see a fly “stuck” in the air admission hole.

How commonly blockages of the air admission hole occur can vary dramatically from farm to farm.

Some farms hardly ever see the hole blocked whilst some other farms need to have a milking protocol where the cups on operator actually wipes the hole clean prior to the application of the cups to every cow.

Every farm should ensure that all milkers are aware of the location of the air admission hole, the signs when the hole is blocked, and the importance of clearing those blockages.

In addition, a routine of cleaning the air admission hole on a regular basis using an appropriately sized probe to ensure there is no build up in the aperture of the hole should be standard on every farm.

Ensure that you check with your milking machine tech that you have the correct sized probe, as unnecessarily enlarging the air admission hole can sometimes have unintended consequences!

Rod Dyson is a veterinary surgeon and mastitis advisor at www.dairyfocus.com.au

More like this

Mobile calf shed inspired by chooks

"I looked at my neighbour's farm and thought, I can do that," said Rohan Bingley.

'That' was replicating the caravans used to house chooks on the neighbouring free range egg farm. Mr Bingley was looking for a solution to raise his dairy calves.

Are your milking practices "normal"?

Recent milking time visits to a number of different dairy sheds have reminded me that “normal” means different things to different people.

Shelter leads to more pasture, more cows

Panmure dairy farmer Simon Rea has lifted herd size from 400 to 540 head and is growing 10% more pasture due to the cow shelter installed on his Panmure farm three years ago.

While the industry makes headlines, the market turns

We're getting close to the peak of the production season in southern Australia, in one of the most tumultuous periods in the recent history of the industry. In the past 18 months, an unprecedented volume of milk has moved between major dairy companies in a short space of time, and most likely has some way to go yet, as the aftershocks of the major step-down in milk prices towards the end of the 2015-16 season continue to reverberate.

More from this category

Flighty cows produce  less milk

Flighty cows are likely to respond to stress, e.g. change of environment, by producing less milk. This and other intriguing points have been noted during a study of dairy cow temperament at AgResearch.

Double reward for reducing mastitis

INNOVATIONS WHICH led to a 41% mastitis reduction in their herd have earned Tasmanian dairy farmers Phil and Lis Beattie a national award and an international trip.

Cheaper than a lame cow


COWSLIPS ARE lifesavers for many cows. Without them many more cows would go to the works. This assumes the slips are put on correctly; I see many instances where they weren’t.

Hygiene underpins calf rearing program

After moving home to the family farm, following time spent living and working in the Caribbean, Annabel Mangal began rearing and selling calves to local hobby farmers in the Adelaide Hills.

Think nutrition now for better production

Farmers should be thinking now about dairy nutrition to set their herds up for better milk production and fertility during the next lactation, says InCalf’s Dr Barry Zimmermann.


Dehorning is a routine animal husbandry practice carried out to lessen the risk of injury to stock, people and other animals during handling and transport of stock.

IN MY role as President of the Australian Cattle Veterinarians, I hear about issues that are concerning cattle vets from all over Australia.

SINCE SOUTHERN Riverina dairy farmers Rob and Gai Singleton moved to the area in 1994 they have developed a strong appreciation for the value of cow comfort in their dairying operation.

Leave a comment

Make sure you enter the (*) required information where indicated.\nBasic HTML code is allowed.

» Get social

When butter and chocolate collide

TWO New Zealand companies Lewis Road Creamery and Whittakers have teamed up to deliver what must be every dairy lover’s dream: chocolate butter.

» E-Newsletter

Subscribe to our mailing list

* indicates required